Identity – Page 4

Biometrics and Derived Credentials

This is Part 4 of a series discussing the public comments on Draft NIST SP 800-157, Guidelines for Derived Personal Identity Verification (PIV) Credentials and the final version of the publication. Links to all the posts in the series can be found here.

As reviewed in Part 3, a PIV card carries two fingerprint templates for off-card comparison, and may also carry one or two additional fingerprint templates for on-card comparison, one or two iris images, and an electronic facial image. These biometrics may be used in a variety of ways, by themselves or in combination with cryptographic credentials, for authentication to a Physical Access Control System (PACS) or a local workstation. The fingerprint templates for on-card comparison can also be used to activate private keys used for authentication, email signing, and email decryption.

By contrast, neither the draft version nor the final version of SP 800-157 consider the use of any biometrics analogous to those carried in a PIV card for activation or authentication. Actually, they “implicitly forbid” the storage of such biometrics by the Derived PIV Application that manages the Derived PIV Credential, according to NIST’s response to comment 30 by Precise Biometrics.

But several comments requested or suggested the use of biometrics by the Derived PIV Application. In this post I review those comments, and other comments expressing concern for biometric privacy. Then I draw attention to privacy-preserving biometric techniques that should be considered for possible use in activating derived credentials.
Continue reading “Biometrics and Derived Credentials”

Biometrics in PIV Cards

This is Part 3 of a series discussing the public comments on Draft NIST SP 800-157, Guidelines for Derived Personal Identity Verification (PIV) Credentials and the final version of the publication. Links to all the posts in the series can be found here.

After Part 1 and Part 2, in this Part 3 I intended to discuss comments received by NIST regarding possible uses of biometrics in connection with derived credentials. But that requires explaining the use of biometrics in PIV cards, and as I delved into the details, I realized that this deserves a blog post of its own, which may be of interest in its own right. So in this post I will begin by reviewing the security and privacy issues raised by the use of biometrics, then I will recap the biometrics carried in a PIV card and how they are used.

Biometric security

When used for user authentication, biometrics are sometimes characterized as “something you are“, while a password or PIN is “something you know” and a private key stored in a smart card or computing device is “something you have“, “you” being the cardholder. However this is only an accurate characterization when a biometric sample is known to come from the cardholder or device user, which in practice requires the sample to be taken by, or at least in the presence of, a human attendant. How easy it was to dupe the fingerprint sensors in Apple’s iPhone (as demonstrated in this video) and Samsung’s Galaxy S5 (as demonstrated in this video) with a spoofed fingerprint shows how difficult it is to verify that a biometric sample is live, Continue reading “Biometrics in PIV Cards”

NIST Omits Encryption Requirement for Derived Credentials

This is Part 2 of a series of posts reviewing the public comments received by NIST on Draft SP800-157, Guidelines for Derived Personal Identity Verification (PIV) Credentials, their disposition, and the final version of the document. Links to all the posts in the series can be found here.

In the first post of this series I discussed how NIST failed to address many concerns expressed in the 400+ comments that it received on the guidelines for derived credentials published in March of last year as Draft Special Publication (SP) 800-157, including concerns about insufficient discussion of business need, lack of guidance, narrow scope, lack of attention to embedded solutions, and security issues. But I postponed a discussion of what I think is the most critical security problem in SP800-157: the lack of security of the so-called software tokens, a concern that was raised in comments including 111 by the Treasury, 291, 311 and 318 by ICAMSC, 406 by PrimeKey AB, 413 by NSA, and 424 by Exponent. This post focuses on that problem.

The concept of a software token, or software cryptographic module is defined in Draft NISTIR 7981 (Section 3.2.1) as follows:

Rather than using specialized hardware to store and use PIV keys, this approach stores the keys in flash memory on the mobile device protected by a PIN or password. Authentication operations are done in software provided by the application accessing the IT system, or the mobile OS.

What does it mean for the keys to be “protected by a PIN or password“?
Continue reading “NIST Omits Encryption Requirement for Derived Credentials”

NIST Fails to Address Concerns on Derived Credentials

This is the first of a series of posts reviewing the comments received by NIST on Draft SP800-157, their disposition, and the final version of the document. Links to all the posts in the series can be found here.

In March 2014, NIST released the drafts of two documents on derived credentials, Draft NISTIR 7981 and Draft SP800-157, and requested comments. Last month it announced that it had received more than 400 comments and released a file with comments and their dispositions.

The file is hard to read, because it contains snippets of comments rather than entire comments (and snippets of comments by the same organization are not always consecutive!). But we have made the effort to read it, and the effort was worth it. The file contains snippets from companies, individuals, industry organizations, and many US Federal government organizations, including the Consumer Financial Protection Bureau (CFPB), the Coast Guard, the Department of Justice (DOJ), the Department of the Treasury, the Department of Agriculture Mobility Program Management Office (USDA MPO), the Department of State (DOS) the Social Security Administration (SSA), the National Aeronautics and Space Administration (NASA), the Department of Homeland Security (DHS), the Air Force Public Key Infrastructure System Program Office (AF PKI SPO), the Identity, Credential, and Access Management Subcommittee (ICAMSC), the Centers for Disease Control and Prevention (CDC), the Federal Public Key Infrastructure Certificate Policy Working Group (FPKI CPWG) and the Information Assurance Directorate of the National Security Agency (NSA). Continue reading “NIST Fails to Address Concerns on Derived Credentials”

Implementing Virtual Tamper Resistance without a Secure Channel

Last week I made a presentation to the GlobalPlatform 2014 TEE Conference, co-authored with Karen Lewison, on how to provide virtual tamper resistance for derived credentials and other data stored in a Trusted Execution Environment (TEE). I’ve put the slides online as an animated PowerPoint presentation with speaker notes.

An earlier post, also available on the conference blog, summarized the presentation. In this post I want to go over a technique for implementing virtual tamper resistance that we have not discussed before. The technique is illustrated with animation in slides 9 and 10. The speaker notes explain the animation steps.

Virtual tamper resistance is achieved by storing data in a device, encrypted under a data protection key that is entrusted to a key storage service and retrieved from the service after the device authenticates to the service using a device authentication credential, which is regenerated from a protocredential and a PIN. (Some other secret or combination of secrets not stored in the device can be used instead of a PIN, including biometric samples or outputs of physical unclonable functions.) The data protection key is called “credential encryption key” in the presentation, which focuses on the protection of derived credentials. The gist of the technique is that all PINs produce well-formed device authentication credentials, Continue reading “Implementing Virtual Tamper Resistance without a Secure Channel”

Smart Cards, TEEs and Derived Credentials

This post has also been published on the blog of the GlobalPlatform TEE Conference.

Smart cards and mobile devices can both be used to carry cryptographic credentials. Smart cards are time-tested vehicles, which provide the benefits of low cost and widely deployed infrastructures. Mobile devices, on the other hand, are emerging vehicles that promise new benefits such as built-in network connections, a built-in user interface, and the rich functionality provided by mobile apps.

Derived Credentials

It is tempting to predict that mobile devices will replace smart cards, but this will not happen in the foreseeable future. Mobile devices are best used to carry credentials that are derived from primary credentials stored in a smart card. Each user may choose to carry derived credentials on zero, one or multiple devices in addition to the primary credentials in a smart card, and may obtain derived credentials for new devices as needed. The derived credentials in each mobile device are functionally equivalent to the primary credentials, and are installed into the device by a device registration process that does not need to duplicate the user proofing performed for the issuance of the primary credentials.

The term derived credentials was coined by NIST in connection with credentials carried by US federal employees in Personal Identity Verification (PIV) cards and US military personnel in Common Access Cards (CAC); but the concept is broadly applicable. Derived credentials can be used for a variety of purposes, Continue reading “Smart Cards, TEEs and Derived Credentials”

Forthcoming Presentation at the GlobalPlatform TEE Conference

I’m happy to announce that I’ll be making a presentation at the forthcoming GlobalPlatform 2014 TEE Conference (September 29-30, Santa Clara, CA). Here are the title and abstract:

Virtual Tamper Resistance for a TEE

Derived credentials are cryptographic credentials carried in a mobile device that are derived from credentials carried in a smartcard. The term was coined by the US National Institute of Standards and Technology (NIST) in connection with US Federal employee credentials, but the concept is generally applicable to use cases encompassing high-security enterprise IDs, payment cards, national identity cards, driver licenses, etc.

The Trusted User Interface feature of a TEE can protect the passcode that activates derived credentials from being phished or intercepted by malware, the user being instructed to only enter the passcode when a Security Indicator shows that the touchscreen is controlled by the Secure OS of the TEE. Besides protecting the passcode, it is also necessary to protect the derived credentials themselves from an adversary who physically captures the device. This requires resistance against tampering. Physical tamper resistance can be provided by a Secure Element accessed from the TEE through the TEE Secure Element API, thus combining protection of the passcode against malware with protection of the credentials against physical capture.

Derived credentials can also be protected against physical capture using cloud-based virtual tamper resistance, which is achieved by encrypting them with a key stored in a secure back-end. The device uses a separate credential derived in part from the activation passcode to authenticate to the back-end and retrieve the encryption key. A novel technique makes it possible to do so without exposing the passcode to an offline guessing attack, so that a short numeric passcode is sufficient to provide strong security.

Physical tamper resistance and virtual tamper resistance have overlapping but distinct security postures, and can be combined, if desired, to maximize security.

Protecting Derived Credentials without Secure Hardware in Mobile Devices

NIST has recently released drafts of two documents with thoughts and guidelines related to the deployment of derived credentials,

NISTIR 7981, Mobile, PIV, and Authentication, and
NIST Special Publication 800-157, Guidelines for Derived Personal Identity Verification (PIV) Credentials,

and requested comments on the drafts by April 21. We have just sent our comments and we encourage you to send yours.

Derived credentials are credentials that are derived from those in a Personal Identity Verification (PIV) card or Common Access Card (CAC) and carried in a mobile device instead of the card. (A CAC card is a PIV card issued by the Department of Defense.) The Electronic Authentication Guideline, SP 800-63, defines a derived credential more broadly as:

A credential issued based on proof of possession and control of a token associated with a previously issued credential, so as not to duplicate the identity proofing process.

A PIV/CAC card may carry a PIV authentication credential, a digital signature credential, a current key management credential and up to 20 retired key management credentials, each credential consisting of a private key and an associated certificate that contains the corresponding public key. The digital signature private key is used for signing email messages, and the key management keys for decrypting symmetric keys used to encrypt email messages. The retired key management keys are needed to decrypt old messages that have been saved encrypted. The PIV authentication credential is mandatory for all users, while the digital signature credential and the current key management credential are mandatory for users who have government email accounts.

A mobile device may similarly carry an authentication credential, a digital signature credential, and current and retired key management credentials. Although this is not fully spelled out in the NIST documents, the current and retired key management private keys in the mobile device should be able to decrypt the same email messages as those in the card, and therefore should be the same as those in the card, except that we see no need to limit the number of retired key management private keys to 20 in the mobile device. The key management private keys should be downloaded to the mobile device from the escrow server that should already be in use today to recover from the loss of a PIV/CAC card containing those keys. On the other hand the authentication and digital signature key pairs should be generated in the mobile device, and therefore should be different from those in the card.

In a puzzling statement, SP 800-157 insists that only an authentication credential can be considered a “derived PIV credential”:

While the PIV Card may be used as the basis for issuing other types of derived credentials, the issuance of these other credentials is outside the scope of this document. Only derived credentials issued in accordance with this document are considered to be Derived PIV credentials.

Nevertheless, SP 800-157 discusses details related to the storage of digital signature and key management credentials in mobile devices in informative appendix A and normative appendix B.

Software Tokens

The NIST documents provide guidelines regarding the lifecycle of derived credentials, their linkage to the lifecycle of the PIV/CAC card, their certificate policies and cryptographic specifications, and the storage of derived credentials in several kinds of hardware cryptographic modules, which the documents refer to as hardware tokens, including microSD tokens, UICC tokens, USB tokens, and embedded hardware tokens. But the most interesting, and controversial, aspect of the documents concerns the storage of derived credentials in software tokens, i.e. in cryptographic modules implemented entirely in software.

Being able to store derived credentials in software tokens would mean being able to use any mobile device to carry derived credentials. This would have many benefits:

Federal agencies would have the flexibility to use any mobile devices they want.
Federal agencies would be able to use inexpensive devices that would not have to be equipped with special hardware for secure storage of derived credentials. This would save taxpayer money and allow agencies to do more with their IT budgets.
Mobile authentication and secure email solutions used by the Federal Government would be affordable and could be broadly used in the private sector.

The third benefit would have huge implications. Today, the requirement to use PIV/CAC cards means that different IT solutions must be developed for the government and for the private sector. IT solutions specifically developed for the government are expensive, while private sector solutions too often rely on passwords instead of cryptographic credentials. Using the same solutions for the government and the private sector would lower costs and increase security.

Security

But there is a problem. The implementation of software tokens hinted at in the NIST documents is not secure.

NISTIR 7981 describes a software token as follows:

Rather than using specialized hardware to store and use PIV keys, this approach stores the keys in flash memory on the mobile device protected by a PIN or password. Authentication operations are done in software provided by the application accessing the IT system, or the mobile OS.

And SP 800-157 adds the following:

For software implementations (LOA-3) of Derived PIV Credentials, a password-based mechanism shall be used to perform cryptographic operations with the private key corresponding to the Derived PIV Credential. The password shall meet the requirements of an LOA-2 memorized secret token as specified in Table 6, Token Requirements per Assurance Level, in [SP800-63].

Taken together, these two paragraphs seem to suggest that the derived credentials should be stored in ordinary flash memory storage encrypted under a data encryption key derived from a PIN or password satisfying certain requirements. What requirements would ensure sufficient security?

Smart phones are frequently stolen, therefore we must assume that an adversary will be able to capture the mobile device. After capturing the device the adversary can immediately place it in a metallic box or other Faraday cage to prevent a remote wipe. The contents of the flash memory storage may be protected by the OS, but in many Android devices, the OS can be replaced, or rooted, with instructions for doing so provided by Google or the manufacturer. OS protection may be more effective in some iOS devices, but since a software token does not provide any tamper resistance by definition, we must assume that the adversary will be able to extract the encrypted credentials. Having done so, the adversary can mount an offline password guessing attack, testing each password guess by deriving a data encryption key from the password, decrypting the credentials, and checking if the resulting plaintext contains well-formed credentials. To carry out the password guessing attack, the adversary can use a botnet. Botnets with tens of thousands of computers can be easily rented by the day or by the hour. Botnets are usually programmed to launch DDOS attacks, but can be easily reprogrammed to carry out password cracking attacks instead. The adversary has at least a few hours to run the attack before the authentication and digital signature certificates are revoked and the revocation becomes visible to relying parties; and there is no time limit for decrypting the key management keys and using them to decrypt previously obtained encrypted email messages.

To resist such an attack, the PIN or password would need to have at least 64 bits of entropy. According to Table A.1 of the Electronic Authentication Guideline (SP 800-63), a user-chosen password must have more than 40 characters chosen appropriately from a 94-character alphabet to achieve 64 bits of entropy. Entering such a password on the touchscreen keyboard of a smart phone is clearly unfeasible.

SP 800-157 calls instead for a password that meets the requirements of an LOA-2 memorized secret token as specified in Table 6 of SP 800-63, which are as follows:

The memorized secret may be a randomly generated PIN consisting of 6 or more digits, a user generated string consisting of 8 or more characters chosen from an alphabet of 90 or more characters, or a secret with equivalent entropy.

The equivalent entropy is only 20 bits. Why does Table 6 require so little entropy? Because it is not concerned with resisting an offline guessing attack against a password that is used to derive a data encryption key. It is instead concerned with resisting an online guessing attack against a password that is used for authentication, where password guesses can only be tested by attempting to authenticate to a verifier who throttles the rate of failed authentication attempts. In Table 6, the quoted requirement on the memorized secret token is coupled with the following requirement on the verifier:

The Verifier shall implement a throttling mechanism that effectively limits the number of failed authentication attempts an Attacker can make on the Subscriber’s account to 100 or fewer in any 30-day period.

and the necessity of the coupling is emphasized in Section 8.2.3 as follows:

When using a token that produces low entropy token Authenticators, it is necessary to implement controls at the Verifier to protect against online guessing attacks. An explicit requirement for such tokens is given in Table 6: the Verifier shall effectively limit online Attackers to 100 failed attempts on a single account in any 30 day period.

Twenty bits is not sufficient entropy for encrypting derived credentials, and requiring a password with sufficient entropy is not a feasible proposition.

Solutions

But the problem has solutions. It is possible to provide effective protection for derived credentials in a software token.

One solution is to encrypt the derived credentials under a high-entropy key that is stored in a secure back-end and retrieved when the user activates the software token. The problem then becomes how to retrieve the high-entropy key from the back-end. To do so securely, the mobile device must authenticate to the back-end using a device-authentication credential stored in the mobile device, which seems to bring us back to square one. However, there is a difference between the device-authentication credential and the derived credentials stored in the token: the device-authentication credential is only needed for the specific purpose of authenticating the device to the back-end and retrieving the high-entropy key. This makes it possible to use as device-authentication credential a credential regenerated on demand from a PIN or password supplied by the user to activate the token and a protocredential stored in the device, in a way that deprives an attacker who captures the device of any information that would make it possible to test guesses of the PIN or password offline.

The device-authentication credential can consist, for example, of a DSA key pair whose public key is registered with the back-end, coupled with a handle that refers to a device record where the back-end stores a hash of the registered public key. In that case the protocredential consists of the device record handle, the DSA domain parameters, which are (p,q,g) with the notations of the DSS, and a random high-entropy salt. To regenerate the DSA key pair, a key derivation function is used to compute an intermediate key-pair regeneration key (KPRK) from the activation PIN or password and the salt, then the DSA private and public keys are computed as specified in Appendix B.1.1 of the DSS, substituting the KPRK for the random string returned_bits produced by a random number generator.

To authenticate to the back-end and retrieve the high-entropy key, the mobile device establishes a TLS connection to the back-end, over which it sends the device record handle, the DSA public key, and a signature computed with the DSA private key on a challenge derived from the TLS master secret. (Update—April 24, 2014: The material used to derive the challenge must also include the TLS server certificate of the back-end, due to a recently reported UKS vulnerability of TLS. See footnote 2 of the technical report.) The DSA public and private keys are deleted after authentication, and the back-end keeps the public key confidential. An adversary who is able to capture the device and extract the protocredential has no means of testing guesses of the PIN or password other than regenerating the DSA key pair and attempting online authentication to the back-end, which locks the device record after a small number of consecutive failed authentication attempts that specify the handle of the record.

An example of a derived credentials architecture that uses this solution can be found in a technical report.

Other solutions are possible as well. The device-authentication credential itself could serve as a derived credential, as we proposed earlier; SSO can then be achieved by sharing login sessions, as described in Section 7.5 of a another technical report. And I’m sure others solutions can be found.

Surveillance and Internet Identity

Last week I attended IIW 17, the 17th meeting of the Internet Identity Workshop, which is held twice a year in Mountain View, California. As usual it was a great opportunity to exchange ideas and meet people, with its unconference format, its many sessions, its rotating demos, its wide space for discussions, and its two free dinners with free drinks.

For me, however, it was tinged with sadness, because of what has happened since the first IIW I attended, IIW 12, in May 2011. IIW 12 was the first IIW after the launch of NSTIC. IIW 17 was the first IIW after Snowden.

The NSTIC Strategy Document, released in April 2011 with a preface signed by President Obama, repeatedly emphasized the goal of enhancing privacy as a key element of the “vision” and “guiding principles” of NSTIC. The document explicitly stated that the Identity Ecosystem will use privacy-enhancing technology and policies to inhibit the ability of service providers to link an individual’s transactions, thus ensuring that no one service provider can gain a complete picture of an individual’s life in cyberspace. At the time, Facebook Connect was threatening to inject Facebook as a middleman in all or most Internet activities, and I was happy to see that the US Government seemingly wanted to prevent such a massive invasion of privacy; I even convened a session at IIW 12 proposing a technique for achieving the privacy goals of NSTIC in the short term. Little did I know that the government was busy building a massive surveillance apparatus that would give the government a complete picture of an individual’s life in cyberspace, by means including bulk collection of data from service providers.

The Internet, given to the world by the US Department of Defense, was a world-wide forum for free-flowing, spontaneous exchange of ideas. Now the NSA, part of the same Department of Defense, has taken that away. People know that they are being tracked and identified when they post an anonymous comment. People know that their conversations are being recorded. Therefore people must think twice about they say.

I don’t know if Congress will be able to rein in the NSA. It should be clear that spying on US citizens is unconstitutional, but some politicians think that it is the NSA’s job to spy on everybody else in the planet. They don’t seem to consider or care that, if the US Government insists on a God-given right to spy on everybody else, other countries or regions may develop their own national or regional networks, separated from the US Internet by an air gap.

Fortunately, the technical community has reacted strongly against the NSA’s attacks on Internet privacy. And thanks to Snowden’s revelations, many of the attack techniques are known. It may therefore be possible to protect Internet privacy by technical means.

Coming back to the subject of the workshop, Internet Identity, I would argue that the first thing to do to protect Internet privacy is to get rid of the pernicious technology variously known as third-party login, social login or federated login. To be precise, I am referring to authentication techniques where the user authenticates to a third-party identity provider, which then provides identity and/or attribute information to a relying party, using a protocol such as OAuth or OpenID Connect. (These are the techniques in Group 2 of the taxonomy proposed in the paper Privacy Postures of Authentication Technologies.)

The only intrinsic advantage of federated login is that it allows the identity provider to collect vast amounts of information about the user, since the identity provider learns not only the user’s identity and/or attributes, but also what relying parties the user logs in to. The identity provider uses the information to sell ads that target the user accurately. We now know that the information is also shared with the government, which makes it available to thousands of analysts and IT personnel who use it for legal or illegal government or personal purposes.

There are no other intrinsic advantages to federated login.

The government and the identity providers argue that federated login is more secure than direct authentication to the relying party with username and password, but the opposite is true.

Security is supposedly increased because federated login reduces password reuse. But password reuse will not be substantially reduced unless a large majority of world-wide web sites force their users to use federated login with one of a small number of global identity providers such as Google or Facebook, something that will hopefully not come to pass.

Security is also supposedly increased because a large identity provider supposedly does a better job of protecting the user’s password. But I don’t know why a large identity provider would provide better protection against hackers, since large companies are not known to provide great security. And I do know that a password entrusted to a large identity provider may become available to thousands of employees of the government, of government contractors, and of the identity provider.. And the capture of a password used at an identity provider, which provides access to multiple web sites, is more damaging to the user than the capture of a password used at a single web site.

There is an alternative to authenticating to a web site with username and password that provides both security and privacy: namely, authentication with a cryptographic key pair automatically generated on the user’s machine when the user registers with the site. The site stores the hash of the public key component of the key pair in its database, and uses it to locate the user’s account when the user visits the site again and demonstrates knowledge of the private key component.

Another claimed advantage of federated login is that the user can register at a new site with a single click if logged in to the identity provider, any personal data required by the site being provided by the identity provider. This is a real advantage, but not an intrinsic one. The same benefit could be easily obtained by storing the personal data in the browser, and specifying a protocol by which the browser would supply selected personal data items to a web site upon demand by the site and approval by the user. Such a protocol would be much simpler than any of the federated login protocols and would provide more security and more privacy.

Yet another claimed advantage of federated login is that the identity provider could provide the relying party with a user’s identity and/or attributes verified by an identity proofing procedure; however, such verified identity and/or attributes could equally well be provided by a certificate authority using a public key certificate (or by multiple authorities providing a combination of a certificate binding a public key to an identity and one or more certificates binding the identity to various attributes), without the certificate authority having to be informed of what relying parties the certificate is submitted to.

It is sometimes argued (cf. the NSTIC 101 session at last week’s IIW) that using public key cryptography for authentication would be expensive and would require the user to carry a separate dongle or smartcard for every credential. This is not true. There is no need for special hardware to store a cryptographic credential, and if special hardware is desired for some reason, there is no need to use different pieces of hardware for different credentials.

Two sessions at IIW 17 gave me hope that Internet privacy is not a lost cause.

One of them was convened by Tim Bray of Google to report on the comments he received in response to a blog post arguing to developers that they should use federated login rather than login with username and password. The comments, which he referred to as a “bloodbath,” showed that neither developers nor end-users like federated login. I hope that such pushback will eventually force companies like Google to give up on federated login.

The other one was convened by Kazue Sako of NEC to discuss anonymous credentials and their possible uses. The room was overflowing and the level of engagement of the audience was high, showing that technical people are interested in privacy-enhancing authentication technologies even if large companies are not.

Feedback on the Paper on Privacy Postures of Authentication Technologies

Many thanks to every one who provided feedback on the paper on privacy postures of authentication technologies which was announced in the previous blog post. The paper was discussed on the Identity Commons mailing list and we also received feedback at the ID360 conference, where we presented the paper, and at IIW 16, where we showed a poster summarizing the paper. In this post I will recap the feedback that we have received and the revisions that we have made to the paper based on that feedback.

Steven Carmody pointed out that SWITCH, the Swiss InCommon federation, has developed an extension of Shibboleth called uApprove that allows the identity or attribute provider to ask the user for consent before disclosing attributes to the relying party. Ken Klingestein told us that the Scalable Privacy NSTIC pilot is developing a privacy manager that will let the user choose what attributes will be disclosed to the the relying party by the Shibboleth identity provider. We have added references to these Shibboleth extensions to Section 4.2 of the paper.

The original paper explained that, although a U-Prove token does not provide multishow unlinkability, the user may obtain multiple tokens from the issuer, and present different tokens to different relying parties. Christian Paquin said that a U-Prove credential is defined as a batch of such tokens, created simultaneously by an efficient parallel procedure. We have added this definition of a U-Prove credential to Section 4.3.

Christian Paquin also pointed out that a U-Prove token is a mathematical concept that can be embodied in a variety of technologies. He sent me a link to the WS-Trust embodiment, which was used in CardSpace. We have explained this and included the link in Section 4.3.

Tom Jones said that what we call anonymity is called pseudonymity by others. In fact, column 9, labeled “Anonymity”, covers both pseudonymity, as provided, e.g., by an Idemix pseudonym or an uncertified key pair or a combination of a user ID and a password when the user ID is freely chosen by the user, and full anonymity, as provided when a relying party learns only attributes that do not uniquely identify the user. I think it is not unreasonable to view anonymity (the service provider does not learn the user’s “name”) as encompassing pseudonymity (the service provider learns a pseudonym instead of the “real name”).

Nat Sakimura provided a lot of feedback, for which we are grateful. He said that Google and Yahoo implemented OpenID Pairwise Pseudonymous Identifiers (PPID), i.e. different identifiers for the same user provided to different relying parties, before ICAM specified its OpenID profile. We have noted this in Section 4.2 of the revised paper and changed the label of row 8 to “OpenID (without PPID)”.

He also said that OpenID Connect supports an ephemeral identifier, which provides anonymity. I was able to find a discussion of an ephemeral identifier in the archives of the OpenID Connect mailing list, but no mention of it in any of the OpenID Connect specifications; so ephemeral identifiers may be added in the future, but they are not there yet.

Nat also argued that OpenID Connect provides multishow unlinkability by different parties and by the same party. I disagree, however. The Subject Identifier in the ID Token makes OpenID Connect authentication events linkable. Furthermore, OpenID is built on top of OAuth, whose purpose is to provide the relying party with access to resources owned by the user by means of an access token. In a typical use case the relying party gets access to the user’s account at a social network such as Facebook, Twitter or Google+. It is unlikely that two relying parties who share information cannot determine that they are both accessing the same account, or that a relying party cannot determine that it has accessed the same account in two different occasions.

Nat said that OpenID Connect can be used for two-party authentication using a “Self-Issued OpenID Provider”. We have added a checkmark to row 11, column 1 of the table to indicate this, and an explanation to Section 4.2.

He also said that OpenID Connect provides group 4 functionality by allowing the relying party to obtain attributes from “distributed attribute providers”. We have mentioned this in Section 4.4 of the revised version of the paper.

Finally, Nat said:

Just by reading the paper, I was not very clear what is the requirement for Issue-show unlinkability. By issuance, I imagine it means the credential issuance. I suppose then it means that the credential verifier (in ISO 29115 | ITU-T X.1254 sense) cannot tell which credential was used though it can attest that the user has a valid credential. Is that correct? If so, much of the technology in group 2 should have n/a in the column because they are independent of the actual authentication itself. They could very well use anonymous authentication or partially anonymous authentication (ISO 29191).

The technologies in group 2 are recursive authentication technologies. The relying party directs the browser to the identity or attribute provider, which recursively authenticates the user and provides a bearer credential to the relying party based on the result of the inner authentication. In all generality there may be multiple inner authentications, as the identity or attribute provider may require multiple credentials. So the authentication process may consist of a tree of nested authentications, with internal nodes of the tree involving group 2 technologies, and leaf nodes other technologies. However, rows 5-11 (group 2) are only concerned with the usual case where the user authenticates to the identity or attribute provider as a returning user with a user ID and a password or some other form of two-party authentication; we have now made that clear in Section 4.2 of the revised paper. In that case there is no issue-show unlinkability.

We have also made a couple of other improvements to the paper, motivated in part by the feedback:

We have replaced the word possession with the word ownership in the definition of closed-loop authentication (Section 2), so that it now reads: authentication is closed-loop when the credential authority that issues or registers a credential is later responsible for verifying ownership of the credential at authentication time. The motivation for this change is that, in group 2, the credential is the information that the identity or attribute provider has about the user, and is thus kept by the identity or attribute provider rather than by the user.
We have added a distinction between two forms of multishow unlinkability, a strong form that holds even if the credential authority colludes and shares information with the relying parties, and a weak form that holds only if there is no such collusion. The technologies in group 2 that provide multishow unlinkability provide the weak form, whereas Idemix anonymous credentials provide the strong form.

Tag: Identity